WPC-CPR-6ASP

The WP CABLING Professional Category 6a In-Line Copler offers easy, toolless termination and complies fully with ISO/IEC 11801, TIA/EIA-568-C.2. It offers a fully shielded die-cast zinc alloy, nickel plated body and gold-plated phosphor bronze contact pins. Suitable for cable diameters between 6 and 9.5mm. IDC termination accepts wire gauges from 22 to 26AWG. Termination is a quick and simple three stage process without any special tools, prepare and position the pairs from each cable within the color-coded termination Load Bar, once in place the termination Load Bar is snapped onto the IDC block. Finally earth either the drain wire or overall braid screen to the shield cap. It can be re-terminated numerous times.

• Transmission properties: Category 6A
• Area of application: Up to 500 MHz, 10GBase-T
• Norms: ISO/IEC 11801 Ed.2,2:2011-06I, DIN EN 50173-1:2011-09 10GB, IEEE 802.3an
• Suitable for Power over Ethernet (PoE, PoE plus e UPoE)
• Tool-free installation on IDC
• Material: Zinc Die-Casting with high quality Nickel plating and ABS UL 94V-0
• Operation temperature: -40° C to +60 °C
• Mating cycles female: > 750 acc. to ISO/IEC 11801
• Clamp: > 200 acc. to ISO/IEC 11801
• IDC wire size: 22 – 27 AWG solid and stranded conductor